In our business, we use the word “sieve” to describe a piece of equipment that separates different sized particles using a woven wire screen. To others, “sieve” can mean something very different.
CSC Scientific Blog
Do You Re-Certify? Compare with a Master Stack? Check with Calibration Samples?
What Does Recertification Give?
The ASTM E-11 committee has done a great job of establishing three levels of testing. These levels show the probability of a sieve’s mesh to be within the permissible variations. These variations relate to the size of openings in wire-cloth used for test sieves.Read More
Topics: Sieve Shakers, Mid-Point Sieves, ASTM, Particle Size Analysis, Sieve Calibration, Sieve Certification, Sieve Testing, Sieving Process, Quiet sieve shakers, RoTap, sieving, test sieve equipment, sieve mesh
Is Sieve Calibration Really the Holy Grail? Part II: Inside a Sieve Test
As I start on this second installment of The Adventures of Pequeño: The 150 Micron Particle, I wonder why I get myself into these serial onslaughts. However, a promise is a promise, so I shall press on.
You will recall from Part I: Sieve Certification, our little friend Pequeño, a particle on a determined quest to make it through sieves -- particularly those through which he should be too large to pass. In this scenario, Pequeño along with some of his family and friends -- all small particles about 150 microns in size -- are on their way to a sieve test.