CSC Scientific Blog

A blog about test equipment

Does Calibration Light The Way To The Sieving Holy Grail

Posted by

Art Gatenby on Aug 19, 2020 4:00:00 PM

All about sieve Calibration

We continue to search for answers to the question "Is Sieve Calibration Really the Holy Grail?Pequeño, you may remember him as a very small (150-micron) particle who has many similar-sized family members. They are determined to defeat Brad and his Sieve Certification. 

Foiling A Sieve Test

In the first episode, he and his family were on the way to a sieve analysis. They had the objective of foiling the sieve test results by passing through sieves with certified openings of less than 150 microns.

Later we described Pequeño & Co.’s experiences in an actual sieve test wherein he and family member got past the 150-micron sieve. Many even transited the 125-micron sieve, which is 16% smaller. The 106-micron sieve finally stopped most of them.

After TheSieve Shaker Stopped

We now rejoin the story after the violent shaking stopped.weighing sieve test results The testers removed the sieves from the stack and emptied the contents onto a balance to obtain a retained-weight distribution for each one. When they came to the 106-micron sieve, Pequeño and couple of his siblings did not drop to the balance, because they were wedged into some of the openings.

When the analysis was completed, a tech used a brush to remove any residual material in the 106-micron sieve. Most everything was cleaned out, but Pequeño was among the particles that were still wedged into openings. The tech saw them on a visual check and wire sieve brushgently pushed them through.

This unfortunately caused the mesh to spread, creating 150-micron openings in this 106-micron sieve -- much greater than the largest allowable opening of 141 that Brad (the Professional Sieve Certifier from the first episode) certified.

The Next Test For The Pequeño Family

The next time, Pequeño and his 150-micron siblings are used in a stack that includes the following sieves:

  • #80 - 180 Micron

  • #100 - 100 Microns

  • #120 - 125 Microns

  • #140 - 106 microns

It is likely that many of them will find their way through the 106-micron sieve and fall on to the next-smallest-size sieve screen. This additional transit, is a result of the cleaning process. Most would assume, given that it is certified, that the 125-micron sieve would catch all of the150-micron particles. Not so. Worse still, a number of these will now pass through this 106-micron certified sieve, which has nominal openings 30% smaller than Pequeño.

When Harry Started To Question

Harry, the QC Manager  has always relied on the Certifying a sievecertification process to insure that his sieves would perform to high standards. He never evaluated the process from the view of a small particle with the mindset: “I want to get through everything and do not care how much error I create.”

Only when repeated tests indicated result anomalies would Harry suspect a problem with sieve performance. After he experienced Pequeño and his siblings’ onslaught, Harry began to consider better methods of predicting and checking real-world sieve performance than certification.

Until the next time, I continue to find new things in the world of material testing that baffle me.

Again we hope to be entertaining and helpful.

Check out the next article in the series here: Sieve Calibration is the Holy Grail!


P.S. If these musings on lab test equipment are engaging, please consider forwarding them to associates and subscribing.

P.P.S. Click on the button to learn more about  Sieve Calibration.


Click me




Topics: Calibration, Particle Size Analysis, Sieve Certification, Sieve Testing, Sieves, Sieving Process, Sieve Analysis

Subscribe via E-mail

Search the Blog

Most Popular Posts

Posts by Topic