Digital Surface Tension Measurment - duNouy Ring Method - Wilhemy Plate Method
An easy to use Surface Tension Tensiometer for both duNouy Ring Method and Wilhelmy Plate Tests
The traditional duNouy Ring test results represent Apparent Surface Tension - a standard for many users for many years.
However, users often have a need for Actual Surface Tension. This requires the calculation of a complex correction factor or extrapolation from a Chart.
The CSC Digital Tensiometer eliminates the need for the DuNouy ring correction. The test results are presented digitally in Actual Surface Tension.
The CSC Digital Tensiometer is changed from a duNouy Ring Method to a Wilhemy Plate Measurement by simply removing the duNouy Ring and replacing it with the Wilhemy Plate.
The set-up is simple. Steps on the screen lead the operator through the set-up and test.
The set-up simply asks for the user to enter the plate dimensions.
The plate is set just above the surface. The CSC Tensiometer checks the weight. A prompt signals the operator to raise the table until the measurement reaches a maximum.
In fact, this maximum is automatically detected and is the basis for the surface tension measurement.
With the Wilhelmy plate, the surface tension reading is the actual surface tension. No correction is needed.
|Surface Tension Accuracy||0.1mN/m|
|Temperature Control (optional)||-10~100|
|Power Supply||110 to 220 Vac|
|Size (mm)||200 x 250 x 310|