Home > Products > Particle Size > Sieves and Calibration > Special Sieves

Wet Washing Sieves – Pocket Sieves – Air Jet Sieves

WET WASHING SIEVES
Extremely useful sieves for samples that need to be separated with the help of wet washing.  Available in 8 inch diameter to 4 or 8 inches deep with brass or stainless steel frames. A complete range of aperture sizes with optional support medium for fine mesh.

AIR JET SIEVES
Uniquely made for use with air jet systems.  They are available in 200mm diameter brass or stainless steel frames and an extensive range of aperture sizes.

Sieves can often look alike, but take a closer look and you’ll find they are not all the same.  In fact there can be some very important differences that may affect the results, performance or life of the sieve.  The illustration shows some of the important features of an Endecotts sieve and gives a good idea of what to look for whenever you specify or reorder.

Endecotts World Class Certified Test Sieves provide accurate, dependable results for precise particle size analyses.  Endecotts sieves are available with either brass or stainless steel frame and stainless steel mesh. All Endecotts test sieves are certified using an ISO 9002 certified manufacturing process that consists of at least five intermediate inspections and one final inspection where up to 30% of the mesh inspected is discarded.  Sieve mesh is compared to precise standards using a microscopic projector and a certificate of compliance is printed for each sieve.