KF-Win/ER New
FDA 21 CFR Part 11 Compliant Software
for Karl Fischer Moisture Titrator
The Titration software compliant with the FDA's (Food and Drug Administration) 21 CFR Part 11 (Electronic Records and Signatures).

MKA-510N Karl Fischer Moisture Titrator (Volumetric Twin burette type) Most advanced volumetric moisture titrator. Fully conformed to GLP and GMP. Built-in manual solvent exchanger is standard. Back titration can be made by the two titration burette.

MKS-510N Karl Fischer Moisture Titrator (Volumetric Single burette type) Single burette version of MKA-510N. Fully conformed to GLP and GMP. Built-in manual solvent exchanger is standard. Safety and EMC features conforming to CE marking declaration.

MKS-500 Karl Fischer Moisture Titrator (Volumetric Single burette type) Low cost and high performance model. Fully conformed to GLP and GMP. Manual solvent exchanger is optional. Safety and EMC features conforming to CE marking declaration.

MKC-500 Coulometric Karl Fischer Moisture Titrator Low cost and high performance Coulometer. Standard interface for RS232C, balance and printer. Range: 10µg - 100mg H2O Sensitivity: 0.1µg H2O

MKC-500-S Coulometric Karl Fischer Moisture Titrator Uses a 1-component electrolytic cell. Low cost and high performance Coulometer. Standard interface for RS232C, Balance and Printer. Range: 10µg - 100mg H2O Sensitivity: 0.1µg H2O

MKC-510N Coulometric Karl Fischer Moisture Titrator Titration cell can be increased to 2 units. Range: 10µg - 100mg H2O, 89µg - 890mgBr2 Sensitivity: 0.1µg H2O

MKC-510N-S Coulometric Karl Fischer Moisture Titrator Uses a 1-component electrolytic cell . Titration cell can be increased to 2 units. Range: 10µg - 100mg H2O Sensitivity: 0.1µg H2O

MKC-510N-SP Coulometric Karl Fischer Moisture Titrator Uses a 1-component electrolytic cell. Titration cell can be increased to 2 units. Range: 10µg - 100mg H2O Sensitivity: 0.1µg H2O

SOFT-CAPE Data Capture Software Measurement results of KEM instrument are directly downloaded to your personal computer for further data processing.

ADP-511 Moisture Evaporator For measurement of solid samples that cannot be placed directly into the electrolyte.

ADP-513 Oil Sample Evaporator For precise determination of water content.

MKA-610-TT (Twin Burettes)
Volumetric Moisture Titrator

MKC-610-DT
Coulometric Moisture Titrator