Certified Test Sieves, test sieve, endecott sieves, quality sieve, sieving equipment, particle size testing

Endecotts World Class Certified Test Sieves provide accurate, dependable results for precise particle size analysis. Endecotts sieves are available with either brass or stainless steel frame and stainless steel mesh. All Endecotts test sieves are certified using an ISO 9002 certified manufacturing process that consists of at least five intermediate inspections and one final inspection where up to 30% of the mesh inspected is discarded. Sieve mesh is compared to precise standards using a microscopic projector and a certificate of compliance is printed for each sieve.


	Home > Products > Particle Size > Sieves and Calibration > Certified Test Sieves




	The highest quality test sieve designed for accurate and efficient particle size analysis








	Sieves can often look alike, but take a closer look and you’ll find they are not all the same. In fact there can be some very important differences that may affect the results, performance or life of the sieve. The illustration shows some of the important features of an Endecotts sieve and gives a good idea of what to look for whenever you specify or reorder.

WORLD RENOWNED
Endecotts is synonymous with quality.

UNIQUE DESIGN
Fillet covers the solder to make sieves easier to clean, ensuring your sample is not trapped or lost in crevices.

PRECISION & ACCURACY
All sieves are examined at least 6 times ensuring the mesh is within compliance to specifications.

CERTIFIED
Available to every National and International specifications.

VERSATILE
Sieves available as airjet, midpoint, calibrated, wet wash microplate, perforated plate, half height, and full height from 1.5 “ to 18” in diameter.

No part of this page or any other page in this site may be copied or reproduced in any way.
© Copyright 2003. CSC Scientific Company, Inc. All rights reserved.

Site designed and maintained by Comprehensive Technologies