CSC Scientific Company, a manufacturer of surface tension measuring equipment announces a project for the trade-in of discontinued Fisher Tensiomat Tensiometers.
The Fisher Tensiomat has been discontinued by Fisher Scientific for approximately two years. 
Repair parts are no longer available creating concern among Tensiomat owners for what happens if their unit fails. to help with this problem, CSC has instituted a new program which will trade-in any Tensiomat for either a CSC Precision Tensiometer or a CSC Interfacial Tensiometer.
The program offers an outstanding value on the new instruments.
It was designed primarily to help owners of Fisher Tensiomats. The program has been extended to the trade-in of any brand tensiometer. This means that owners of any faulty tensiometer can take advantage of this special trade-in offer and get either of the CSC duNouy Tensiometers.
Click on the button to get details of this trade-in offer.
You can get more detail and specifications in the Surface Tension section of our web site.
Addition information is also available at CSC Scientific On-Line Store.
FOR IMMEDIATE RELEASE:
Merrifield, Va. – Jan. 9, 2012
CSC Scientific Releases New Video: “How to Run a Digital Moisture-Balance Test”
CSC Scientific, a manufacturer and distributor of moisture measurement instruments, has released a new video that succinctly illustrates its Digital Moisture Balance machine’s ease-of-use, ruggedness and accuracy.
The current instrument can be used to measure moisture content in liquids and solids of a few grams to 100 grams. Accuracy is at +/- 0.2 percent moisture. It can be attached to a printer and interfaced to a computer. It will produce readouts yielding percentages of moisture and solids as well comparing initial to final weight. The CSC Digital Moisture Balance calibration settings can be periodically checked on-site with the included calibration weight.
It can be operated in three modes:
- Manually (with full operator control) to evaluate the product
- Time (stopping the test after a pre-set time) to insure identical tests among multiple instruments
- Automatic (stopping when test is completed) shutting down on optimal point on drying curve
The video demonstrates that the instrument can be used by non-technical personnel on the production floor under adverse conditions as well as being used in the laboratory with confidence by trained professionals. Regardless, the results will be reliably consistent within the advertised tolerances.
Contact CSC Scientific to determine the correct instrument for your application via email agatenby@gmail.com or phone 703-876-4030.
These CSC Instruments are available from several of the laboratory supply dealers or directly from the CSC Scientific Company.
___________________________________________________________________________________
CSC Scientific Company specializes in the measurement of particle size, moisture and surface tension. Because of this specialization, we offer in-depth, experience-based advice for measurement needs. For more information visit http://www.cscscientific.com
Media Contact: Art Gatenby CSC Scientific Company, Inc. (703) 876-4030, artgatenby@cscscientific.com
###
New Tensiometer Article and Video
CSC Just Published a new article about the reasons to Calibrate a Ring Tensiometer. Click this Button to read it.
In Conjunction with publication of the article the Company released a new Video that demonstrates the calibration process. Check out the Video by Clicking on the yellow button.
For more information contact CSC Scientific Company, Inc. , 2799-C Merrilee Drive, Fairfax, VA 22031. Phone: 703-876-4030 - Email artgatenby@cscscientific.com
FOR IMMEDIATE RELEASE:
Merrifield, Va. – Apr. 29, 2011
CSC Scientific Announces Replacement for Discontinued Fisher Tensiomat© Tensiometer
CSC Scientific, a manufacturer and distributor of surface tension analysis products, announces a replacement for the now-discontinued Fischer Scientific Tensiomat© surface tension tensiometer. Any user who requires a new instrument or a repair of an existing instrument should contact us. The CSC Precision Tensiometer and Interfacial Tensiometer models are direct replacements.
After long deliberation, Fisher Scientific has discontinued its Tensiomat© surface tension tensiometer, which has been produced for decades.
CSC Scientific has produced tensiometers since the 1950s. These perform the same tests and are a direct replacement for the Tensiomat©. The CSC models are the called the Precision and Interfacial Tensi
ometers. The difference between the CSC tensiometers is:
Precision Tensiometer - Readings are obtained from an upward pull through the sample.
Interfacial Tensiometer – Readings can be obtained from an upward pull or a downward push
The CSC Interfacial Tensiometer is needed when 
calculating interfacial tension between a less-dense fluid and a heaver one located below the interface. The ring is rigidly attached to the measuring arm to obtain a downward measurement. We also recommend the Interfacial Tensiometer when the tested material is a thick liquid. This makes it easier to set up the ring below the liquid surface.
A key component of any of these instruments is the duNouy ring, which is a precision device made of a platinum-based alloy. The rings are manufactured utilizing special forming and welding techniques unique to this alloy and can be used with existing Fisher Tensiomat© units.
CSC Scientific has produced these rings for more than 50 years.
We offer long-time users service and repair of these discontinued Fisher Scientific Tensiomat© units and will do so as long as replacement parts are available. The 
duNouy rings are fragile and are frequently dropped, misshapen or broken. CSC Scientific has maintained a ring repair service for many years and will repair Fisher-supplied rings..
Either the CSC Precision or the CSC Interfacial Tensiometers can be used as direct replacements for the Tensiomat©.. Contact CSC Scientific to determine the correct tensiometer for your application via email service@cscscientific.com or phone 703-876-4030.
These CSC Instruments are available from several of the laboratory supply dealers or directly from the CSC Scientific Company.
___________________________________________________________________________________
CSC Scientific Company specializes in the measurement of particle size, moisture and surface tension. Because of this specialization a prospect can get in depth experience-based advice on their measurement problems. For more information visit http://www.cscscientific.com
Media Contact: Art Gatenby CSC Scientific Company, Inc. (703)876-4030, artgatenby@cscscientific.com
###
Finally A Quick, Easy, Traceable Way to Calibrate Test Sieves
CSC Scientific announces the introduction and support of a new system
for the specification, evaluation, and performance tracking of test sieves. The Company expects the system of calibrated glass microspheres and inspection procedures to revolutionize the analysis of test sieve performance.
For full detail of the news release visit CSC Introduces.
If you need to discuss your sieve calibration requirements call us at 703-876-4030 or email sievecalibration@cscscientification.com.
CSC Scientific Company