You may remember Pequeño and his family of very small 150 micron (150µ) particles being very determined to defeat sieve certification.
CSC Scientific Blog
We continue to search for answers to the question "Is Sieve Calibration Really the Holy Grail?" As promised,we present Episode III of the Pequeño saga. You may remember him as a very small (150-micron) particle with many similar-sized family members who are determined to defeat sieve certification.
- Is your concrete going to be strong enough?
Will you chocolates taste right?
Will your washing powder flow and dissolve as advertised?
Is there dangerous residue in your pill stock?
Will the “frack sand” keep the fractures open?
Is my salt of the correct grade?
If these are not correct, serious consequences could result (e.g. spoiled product, returned batches, rework or scrap).
In April, we published an article in "Powder-Bulk Solids" comparing certification process veracity with a sieve calibration process using calibrated glass microspheres (or beads). The certification process merely indicates that a sieve mesh conforms to a standard that has a wide tolerance regarding mesh openings. It is performed on a small number of openings. On the other hand, calibration using the calibrated beads results in a number representing the mean opening -- a result generated by actually performing a test encompassing at least 80% of the mesh openings.
When I tell people at cocktail parties that we specialize in Particle-Size Analysis. I usually get a polite response of ------ “OH !!,” which translates to “So who cares?”