Regularly I’m asked the question; “How accurate is this moisture balance?”

The questioner asks for the answer in terms of percent (%) moisture. When I answer “it depends”, I always get the unspoken response, “Why did I ask this stupid idiot?”

Absolute Measurement

When you ask about the accuracy of something like weight or temperature the answers are straight forward and relate to the instruments' precision. For example 25 grams or 50 degrees plus or minus (+/-) 0.1 gram or 1/2 degree.  

Percent is Relative

When you ask the question of how accurate is my percentage reading, the answer becomes complicated. It’s complicated because percentage (%) is a relative term. For example, the answer for the result of a Loss on Drying (LOD) moisture test, is based on the size of the sample you use.

Using the example of a LOD moisture test we can understand the concept. The result of this type of test is calculated by subtracting the weight of the sample at the end of the test from the weight of the sample at the beginning of the test. This difference is divided by the initial weight of the sample. This procedure produces a % moisture result.

Sample Size

In the following analysis, the implication s of sample size and instrument precision will be illustrated. This will be based on a sample that has 23.5% moisture and an electronic LOD moisture balance that has a sensitivity of 0.001 grams and repeatability of ± .005 grams.

Sample Analysis

Read More

Topics: Moisture Analysis, Moisture Testing, CSC Digital Moisture Balance, Loss-On-Drying, Moisture, moisture balance, instrument accuracy

Moisture content is a critical factor to consider in the food industry. The amount of water in a product affects the product’s texture, shelf life, ease of processing, and cost to produce. Snack foods, baked goods, pet food, and dried goods are just a few examples of products that are vulnerable to moisture content issues like these. In many cases, an easy loss-on drying (LOD) test will allow you to monitor the moisture content of these products. (See the 3 Easy Steps to Run a LOD Test here.) 

 

Simple moisture analysis can be all it takes to improve the quality of your product. Let’s take a closer look at how moisture content affects each of these four product and production aspects.

Read More

Topics: Moisture Oven Test, Moisture Analysis, Moisture Testing, CSC Digital Moisture Balance, Loss-On-Drying, Moisture, fast moisture test, moisture balance, moisture content, moisture measurement

Loss on Drying (LOD) Moisture Balance analysis is based on drying a sample and comparing the difference in weight before and after drying. 

Read More

Topics: Moisture Testing, Loss-On-Drying, moisture balance

One quiet night, long ago I was musing over moisture analysis and how easy it is to do using Loss-on Drying (LOD). Little did I know what was in store.

Read More

Topics: Bound Moisture, Moisture Analysis, Moisture Testing, Loss-On-Drying

Five years ago, we published an article on in-line vs. off-line moisture measurement. At that time we debated whether these measurement systems should be called on-line or in-line. We chose to use the term "on-line". Since then, however, the world of the internet became known as "online". So, to avoid confusion, we changed our view and now refer to direct measurement as "in-line" moisture measurement.

Read More

Topics: Moisture Analysis, Moisture Testing, Loss-On-Drying, In-Line Moisture Measurement

A question we get a lot is:

“How do I determine the moisture in my product?"

Of course, the answer is often “it depends”, and the method does depend on the chemical and physical composition of the product. There are several methods used to determine moisture content: Loss-on-Drying (also known as Weight Loss), Karl Fischer, NIR, and Radio Frequency. 

Read More

Topics: "Ask Art", Moisture Analysis, Karl Fischer, CSC Digital Moisture Balance, Loss-On-Drying, Moisture

I am very excited about a new update to the CSC Digital Moisture Balance.  To give you a perspective of why I’m excited about this Moisture Content Analyzer update, I thought you my be interested in the story of the transition from a classic mechanical moisture analyzer to the current highly robust and durable electronic instrument of today. 

Read More

Topics: Moisture Analysis, Moisture Testing, Loss-On-Drying

“Why are my Moisture Test results inconsistent?” 

That is an issue for many of you who test for moisture. We discussed the complexities and multiplicity of issues involved with moisture content determination in our “Loss-on Drying Moisture Analysis and other Moisture Mysteries” series.

In addition to intrinsic properties of test samples that may adversely affect moisture testing systems, automatic equipment parameter set-up, operator oversights and sample handling contribute to seemingly intractable moisture test result inaccuracies.

Read More

Topics: Moisture Analysis, Moisture Testing, Karl Fischer, Loss-On-Drying, Moisture